Skybean Chasecam

149.00 139.00

Beschreibung

SkyBean ChaseCam is a unique product that will allow you to capture an amazing video of your flight from an angle never seen before. Re-live your adventure from a perspective of an eagle following you throughout the entire flight. The ChaseCam allows  you to share your flying experience with friends and loved ones.

 

copatible gif - Skybean ChasecamSuitable for various action cameras – GoPro Hero 3, 3+, 4, GoPro Hero 4/5 Session, GoPro Hero 5/6 Black, Gitup Git2. ChaseCam does not include a camera.
easy start gif - Skybean ChasecamWe created a simple, but sophisticated device, so everyone is able to launch smoothly and safely, with ChaseCam on board or from the ground.
light gif - Skybean ChasecamConstruction is made from lightweight and durable plastic.
safe gif - Skybean ChasecamWe spent hundreds of hours in research and development using aerodynamic and wind tunnel simulations. ChaseCam is absolutely safe to use and does not affect the quality of flight.
stable gif - Skybean ChasecamStable output from the ChaseCam is achieved by using an aerodynamically stable profile, which was developed during hours of simulations and with practical tests in a wind tunnel.
durable gif compressor - Skybean ChasecamCamera case is made from tough material, which protects it during non ideal takeoffs and landings. Wings are made from flexible material and are assembled with laces, so it is hard to break it.

amera securitypackage%20contains%20litle - Skybean Chasecam

We upgraded the design for maximum security of your action camera. Fix the camera in the ChaseCam housing with the silicon band. Silicon band is including in the package. Housing for GoPro Hero Session does not need silicon band.

klklk - Skybean Chasecam

design

ChaseCam heads are produced with the newest technology of 3D printing. Those prints are heat sensitive. Do not leave ChaseCam in hot / sunny places for long time. Product can not be exposed to long-term pressure. After using ChaseCam do not leave camera inside and let loose silicon band so it does not deform the head.

chasecam%20vyroba%203 - Skybean Chasecam

specification

a - Skybean Chasecama - Skybean Chasecam

SkyBean ChaseCam weight is only 170 grams. In normal flight (approx. 40km/h), it produces about 1.5N brake force, enough to fly a safe distance from the lines.

forever%20zmenseny - Skybean Chasecamforever%20zmenseny - Skybean Chasecam

SkyBean ChaseCam is connected to the canopy with bungee rope, stretched only 13% during normal flight, what brings extra safety in case it is accidentally tangled up in the lines. Please read user guide on our support page.

dimensions

CHASECAM%2024.6.2016 - Skybean ChasecamCHASECAM%2024.6.2016 - Skybean Chasecam

how to use
SkyBean ChaseCam will capture many amazing adventures. To achieve the best possible stability and quality of a video, please follow all the instructions in video below or/and in the user guide at our support page.

how to assemble

You will receive disassembled SkyBean ChaseCam. Assembly takes about 30 minutes. To achieve the best possible stability and quality of a video, please follow all the instructions in video below or/and in the user guide at our support page.

SkyBean ChaseCam was developed especially with a focus on safety. During normal flight, ChaseCam flies behind far enough with no adverse effect on the glider or flight speed. We know, as active pilots, what can happen in the air and because of that, we also tested SkyBean ChaseCam in non standart flight situations.

When you activate your speed system or when you turn a spiral, increased speed will produce more brake force and the bungee rope will be stretched more, therefore ChaseCam will go further away from the glider, and  then the photo image takes in the entire canopy and pilot. There is some possibility that  ChaseCam will tangle if incorrectly exiting from a spiral, like during a big wing-over. You can see a little kick in what is captured when you enter or leave a strong thermal, but don’t worry, safety level is high. Small wing-overs will bring ChaseCam closer to the lines with nice video effect. Really big wingovers can tangle ChaseCam into the lines, but with no safety concern; the photo image will temporarily face elsewhere. During asymmetrical collapse, dynamic or held, the glider is still moving forward, so ChaseCam still produces braking force, so this maneuver won’t tangle the ChaseCam. A dynamic frontal stall is usually recovered very quickly with some altitude lost, which will ensure no adverse effect on the ChaseCam’s position from the glider. During a B-stall, the glider will lose its forward speed, and therefore ChaseCam can be tangled in the lines, particularly if you pull it dynamically.

  • Head – camera case
  • Silicon band for fixing the camera
  • Bungee rope with clip for canopy connection
  • Wings (ChaseCam body)
  • Laces (ChaseCam body)
  • Velcro (for harness launch)

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Skybean Chasecam“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

+ 13 = 20